Constant temperature and humidity test chamber users can solve the damp heat system fault (below)

In the previous section, there was a self-solving solution about humidity display of 100% or low humidity, low humidity and lack of water in the water tank. The following section will continue to describe the problems of the damp heat system that users of the constant temperature and humidity test chamber can solve by themselves.

3. Humidity rises slowly or not at all

Self-solution 1: Check whether the humidity OUT on the controller has output, or 100% output;

Self-solution 2: Check whether the SSR2 signal lamp is lit, if it is lit, you can use a clamp meter to measure the current;

If there is no current, it may be the following reasons:

a. FQ2 circuit breaker tripped, cutting off the heating path;

b. The humidified solid state relay SSR is damaged, there is signal input but it cannot be turned on

c. The humidification tube is damaged;

High and low temperature 0.jpg

If the humidity signal is input on the controller, but the signal indicator on the SSR is not on, you need to focus on checking the water level detection float of the humidification water tray (or humidification boiler) to see if the float is not floated because it is not enough, or the water level Enough is enough, but the floating ball is damaged causing no action, and the humidification signal is sent to the SSR from the surface, and the humidification cannot be performed;

If there are more than two humidification tubes, check if some of the humidification tubes are not working, resulting in insufficient humidification capacity. The temperature and humidity point of the test is just at the switching point of high humidity and low humidity. The dehumidification capacity is too large, which causes the humidity to rise. Feedback the factory in time, and the factory provides technical support to change or upgrade the parameters.

Three sizes of 550 ml,700 ml,1000 ml available in our black and red round bowls. Made with heavy food grade materials,featuring good hardness and not easy to deform in carrying hot food.All the colors on surface are safe,nontoxic, harmless.

Sushi Plastic Tray Bowl

Sushi Plastic Tray Bowl,Plastic Round Bowl,Disposable Plastic Sushi Bowl,Disposable Plastic Round Bowl

Taishan MeiBao Plastic Products Co.,Ltd , https://www.meibaoplastic.com

Posted on