The basic components of cabinet furniture include: panel, top plate (floor), partition (two types of activities, fixed), front frame, rear frame, side panel or side frame (including core frame, glass frame), door (glass) Doors, solid wood doors, curved wood doors), drawers (hollowed, solid, fiberboard), decorative strips (front, side), connecting wood (including triangular wood) dustproof board, hardware.
Connecting wood
1. The connecting wood generally sets up the connection and reinforcement function at the joint part of the component and the component. According to the actual requirements, the choice of materials is not the same, generally divided into hardwood and softwood.
2, the connection wood can be divided into ordinary connecting wood and shaped connecting wood.
3, the connection wood where the hand can touch must be inverted R, the material requirements must be connected to the rear frame requirements.
4. When connecting the wood group to another component, it must ensure that the position of the connecting wood and the other component have a gap of 0..5mm-1mm to maximize the connection.
Related reading: panel and top and bottom plate of basic components of cabinet furniture
Dust board
1. The dustproof plate is located inside the whole cabinet to prevent the dust at the upper end from falling into the inside of the entrance or the drawer.
2. The thickness of the dustproof board is generally two kinds of 3mmMDF board and 5mmMDF board. 3mm is generally used to block the dust of the drawer. 5mm is generally used to block the dust inside the door. The inner surface must be attached to the inner surface. The mooring sheet must be required according to the inner surface of the side plate, and the sanding is good and colored.
3. The connection mode of the dustproof board is generally inserted into the dustproof plate slot of the front frame and the rear frame at both front and rear ends, and the two ends are fixed by connecting wood and horse nails and straight nails.
4. The dustproof board is generally not allowed to be made of plywood to prevent the plywood from being deformed by moisture.
Hardware
1, the hardware is generally in the front of the cabinet and inside the cabinet. The front is generally a handle, a hinge, an adjustment foot pad, a foot nail, and the like, and the inside is generally a door clip, a power socket, a lamp, an angle iron or the like.
2, the color of the handle. The appearance must meet the actual use requirements.
3. The color of the hinge must meet the actual requirements. The opening angle must be determined according to the design. The Screw head is not allowed to be exposed during assembly, and no contamination is allowed during the painting.
4, the door clip is generally divided into three types: high, magnetic, and low, mainly to control the position of the door, the screw head must be the umbrella head when assembling.
5, power outlets, lamps, including wires must be labeled with UL, the installation location and installation must meet the requirements.
Manufacturing Capability
We have powerful manufacturing capability, our automatic lathes, CNC lathes, CNC machining centers, stamping machines and cold heading machines plus auxiliary equipment like milling machine, grinding machine, EDM and the cooperation of our partners, we are able to support every different components regardless of the prototyping or series production
Threaded Round Nuts,Female Thread Brass Nut,Thread Brass Nuts,Knurled Rivet Nut
Shenzhen Lanejoy Technology Co.,LTD , https://www.ccls-vaccine.com