Manual Breast Pump With Suction Ball
1. Breast Pump is suitble for that baby cannot directly suck the breast milk or something wrong with mom's nipple.
2. It's natural attraction and release functionality design can imitate baby's sucking motion and tempo so that relief the distending pain of breast.
3. The suction can be freedom adjusted according to your need.
4. Manual breast pump made of imported food materials. safe & non-toxic, use safely.
5. Lightweight design is portable and discreet.Textured massage cushion helps pulling nipple out.
6. Compact, lightweight design of the pump body makes it easy to hold and position on your breast.
7. Cambered shape of the nozzle, more effective, more seals close to breast, do not leak when use the breast pump.
8. Storage bottle of breast milk pump can store breast milk alone, and do not worry about the milk sucked out inconvenient to handle.
Products Details
| Item No | BP-17 |
| Name | Manual Breast Pump |
| Product Weight | 135g per set |
| Material | Silicone+PP |
| Color | Customerized |
| Heat-resistance | Silicone-50~200°C; PP:-20~120°C |
| BPA | Bpa Free |
| Packing | Blister card,color box |
| Delivery | Sample 7 days, production goods about 20 days |
Product Show
Use instruction step
1. Clean your hands, clean and boil to sterilize 3-5minutes of the parts, suction ball and connecting pipe before use
2. Match the bottle body into the breast cover,then connect the silicone pipe and suction ball to the rear end of breast pump cover.As picture showing: 
3. Wipe the nipple with clean gauze and warm water.
4. Cover the breast with the pump and lean slightly. Hold the bottle in one hand and squeeze the silicone rubber ball in the other hand. The negative pressure can be adjusted by squeezing ball times.
5. When finish suck, or the negative pressure is too high, then lightly press the breast pump and contact breast by hand to let the air in,then removed the breast pump.
6. After suck milk, take down the bottle and put on the nipple to feed directly or storage it in the refrigerator and re-feed when demand.
Warning:
1. Wash and boil and sterilize for 3-5 minutes before and after use. Long boiling or hard clean brush will damage the product. .(Generally, no disinfection is required for suction ball and pressure relief valves.)
2. When installing components, ensure the installation is correct(especially sealing rings)
3. If the mother has a disease in her breast, please talk to your doctor
4. Massaging breast before sucking or covering warm and wet towel, can promote breast milk secretion, more easy to suck.
5. Keep the breast pump and bottle vertical access when suck milk, to prevent leakage of milk
6. Put in the place where the baby is not in contact when not use.
Our Services
OEM service of breast pump or other series is very welcome. We will provide all the details to customers during the mass production. Customize mould according to your requirement and your requirements and complaints are highly respected. Necessary test and certification can be obtained as you request.
FAQ
1. Are you manufacturer or Trade Company?
We are OEM baby products factory . Our factory have more than 10 years history, we have rich experience in producing baby feeding bottle, baby cups, teethers, pacifier, breast pump etc.
Â
2. Can I get samples for comfirmaion?
Yes,of course. we supply samples for free. The freight chare paid by customer .
 Â
3.How long will be the mold time?
Commonly is 30 days for breast milk pump. Send us your original breast pump or give us the design file, we can open new mold for you.
Â
4. Can I have my own logo to design on the manual breast pump?
Yes, of course. we can do silk printing, hot stamping, applique sticker, Please provide us the PDF, AI file or picture. If you want the Logo on the breast pump,we can open  private mold  for you.
Â
5. Can u give me your price list?
No problem, we are baby product manufacturer, and we have more than 3000 items, our baby items have different weight, different color,  artwork, decoration request. So please send me your detail request, then I will email you back the price.
Manual Breast Pump With Suction Ball
1. Breast Pump is suitble for that baby cannot directly suck the breast milk or something wrong with mom's nipple.
2. It's natural attraction and release functionality design can imitate baby's sucking motion and tempo so that relief the distending pain of breast.
3. The suction can be freedom adjusted according to your need.
4. Manual breast pump made of imported food materials. safe & non-toxic, use safely.
5. Lightweight design is portable and discreet.Textured massage cushion helps pulling nipple out.
6. Compact, lightweight design of the pump body makes it easy to hold and position on your breast.
7. Cambered shape of the nozzle, more effective, more seals close to breast, do not leak when use the breast pump.
8. Storage bottle of breast milk pump can store breast milk alone, and do not worry about the milk sucked out inconvenient to handle.
Products Details
| Item No | BP-17 |
| Name | Manual Breast Pump |
| Product Weight | 135g per set |
| Material | Silicone+PP |
| Color | Customerized |
| Heat-resistance | Silicone-50~200°C; PP:-20~120°C |
| BPA | Bpa Free |
| Packing | Blister card,color box |
| Delivery | Sample 7 days, production goods about 20 days |
Product Show
Use instruction step
1. Clean your hands, clean and boil to sterilize 3-5minutes of the parts, suction ball and connecting pipe before use
2. Match the bottle body into the breast cover,then connect the silicone pipe and suction ball to the rear end of breast pump cover.As picture showing:
3. Wipe the nipple with clean gauze and warm water.
4. Cover the breast with the pump and lean slightly. Hold the bottle in one hand and squeeze the silicone rubber ball in the other hand. The negative pressure can be adjusted by squeezing ball times.
5. When finish suck, or the negative pressure is too high, then lightly press the breast pump and contact breast by hand to let the air in,then removed the breast pump.
6. After suck milk, take down the bottle and put on the nipple to feed directly or storage it in the refrigerator and re-feed when demand.
Warning:
1. Wash and boil and sterilize for 3-5 minutes before and after use. Long boiling or hard clean brush will damage the product. .(Generally, no disinfection is required for suction ball and pressure relief valves.)
2. When installing components, ensure the installation is correct(especially sealing rings)
3. If the mother has a disease in her breast, please talk to your doctor
4. Massaging breast before sucking or covering warm and wet towel, can promote breast milk secretion, more easy to suck.
5. Keep the breast pump and bottle vertical access when suck milk, to prevent leakage of milk
6. Put in the place where the baby is not in contact when not use.
Our Services
OEM service of breast pump or other series is very welcome. We will provide all the details to customers during the mass production. Customize mould according to your requirement and your requirements and complaints are highly respected. Necessary test and certification can be obtained as you request.
FAQ
1. Are you manufacturer or Trade Company?
We are OEM baby products factory . Our factory have more than 10 years history, we have rich experience in producing baby feeding bottle, baby cups, teethers, pacifier, breast pump etc.
Â
2. Can I get samples for comfirmaion?
Yes,of course. we supply samples for free. The freight chare paid by customer .
 Â
3.How long will be the mold time?
Commonly is 30 days for breast milk pump. Send us your original breast pump or give us the design file, we can open new mold for you.
Â
4. Can I have my own logo to design on the manual breast pump?
Yes, of course. we can do silk printing, hot stamping, applique sticker, Please provide us the PDF, AI file or picture. If you want the Logo on the breast pump,we can open  private mold  for you.
Â
5. Can u give me your price list?
No problem, we are baby product manufacturer, and we have more than 3000 items, our baby items have different weight, different color,  artwork, decoration request. So please send me your detail request, then I will email you back the price.
The new shape Battery Voltage Tester supports four standard miniature UAV battery interfaces, plug and play,Supports JST (2.54mm), MOLEX (2.0mm), mCPX (2.0mm),
MCX (1.25mm), Support LiFe (3.3 / 3.65V), LiPo (3.7 / 4.20V), Li-Hv (3.8 / 4.35V) for lithium batteries,Four battery interfaces support reverse battery polarity protection, Supports four battery interfaces LiFe, LiPo, LiHv, 0.36-inch red digital display, showing battery voltage, battery voltage detection accuracy to 10mV, can fix the wire.
Battery Voltage Tester
Battery Voltage Tester,Life Battery Voltage Tester,Lihv Battery Voltage Tester,Lipo Battery Voltage Tester
Airjugar Technology Co., Ltd. , http://www.airjugarFPV.com