Lu Weiguang, chairman of Anxin, said
Floor formaldehyde exceeds the standard
Caused by multi-layer adhesive
Lu Weiguang, chairman of Anxin, explained yesterday that the first case of formaldehyde in its products exceeded the standard. This result was caused by the use of multi-layer adhesive glue and double-paste technology.
Lu Weiguang explained that the batch of the problem was produced by Anxin for the first time using double-paste technology, that is, pressurizing and pasting up and down, during which multi-layer adhesive glue was used, and there may be cases where formaldehyde exceeded the standard in the process. Under investigation.
In this regard, the industry said that the wood itself does not contain formaldehyde, but because all the plate products use a lot of adhesives in the manufacturing process, and formaldehyde comes from the adhesive, so the unreasonable application of the adhesive may be excessive formaldehyde. The reason is.
In addition, according to Anxin floor news spokesperson Hu Ya, yesterday, a quarter of the owner's floor in the 7th building of Vanke Foshan New City Bay was recalled. As for how to replace and compensate in the next step, Anxin will listen to the opinions of the community owners and cooperate with Vanke to carry out specific work.
â– News link
Vanke announced
First Essence Failure Report
On the evening of March 1, Vanke announced the sample of Anxin solid wood composite floor of No.7 Building, Foshan New City Bay, which was sent for inspection. The formaldehyde emission was 1.9mg/L, which exceeded the national standard limit of 1.5mg/L. This is also the first report of failure of Vanke since the re-examination of Anxin Floor.
The batch of unqualified flooring was 19300006, which is 15mm thick teak flooring, which is slightly higher than the 12mm floor purchased by Vanke and the process is more complicated. According to Lu Weiguang, the volume of this shipment was only over 3,200 square meters. It was only supplied to Vanke, and the rest was still in stock.
Anomatic Advantages:
· High purity solvent free gases
· Does not change the appearance of the canister.
· Fully replicates the profile of canisters
· Hydrophobic low surface energy system
· Fully licensed sustainable process
· Environmentally friendly with a low carbon footprint.
Aluminum anodization is an electrochemical process that enhances the strength, durability, and appearance of aluminum. When aluminum is oxidized, super-strong oxide (anodic) layers [grow" on the surface of the metal. These new layers are highly resistant to wear and corrosion.
The exacting part to part consistency achieved with our unique anodizing system cannot be obtained with conventional hoist line systems. Conventional anodizing systems present parts with varied coating thicknesses and voids formed due to air pocketing.
A consistent uniform 6 µm anodic film thicknesses will protect certain drug formulations and the canister from degradation. Heavier film thicknesses of up to 12µm can be provided to meet your more demanding application.
Drug Delivery Components,Contact Down Force Components,Precision Device Measures Components,Mdi Direct Placement Transducer Components
Anomatic(suzhou)metal packaging co,ltd , https://www.anomaticpharma.com