More and more consumers will choose wood furniture when they are at home. The wood furniture is not only beautiful in texture, but also moderate in price and variety. Then, consumers should pay attention to the following aspects when purchasing wood furniture.
The production process of wooden furniture should be considered
In the production of wooden furniture, the formed plates are assembled by cutting, decorative and edge-sealing parts. Look at the quality of the production of wood-based panel furniture mainly depends on the quality of the cutting saw, the quality of the edge and surface decoration and the quality of the plate port. In the cutting saw, the plate has quality requirements for the flatness, verticality and angle of the plate parts. Generally speaking, the cutting technology of the plate can achieve the accuracy requirement within the range of 0.01 mm per meter. Well, there will be no tilting of the plates after the furniture is made.
The side and surface decoration mainly depends on whether the rubber coating on the decorative part is uniform, whether the bonding is firm, whether the trimming is smooth and smooth, whether the end face of the visible part such as the side plate, the door panel and the drawer panel of the component is sealed, and the decoration is finished. There is no trace of adhesion on the edge of the fine board.
Assembling the combination mainly depends on whether the hole at the hole is exquisite and tidy, whether the connector is firm after installation, and there is no gap between the plane and the end face, and there is no looseness by hand pushing. Whether the gap between the door and the drawer is too large, the general requirement is to be between 1.5mm and 2.0mm, and whether the opening and pulling of the door and the drawer are flexible and free.
The size of wooden furniture should pay attention to
Wood furniture is currently mainly based on complete sets of bedroom furniture and office furniture. In addition, there are also multi-functional film and television electrical cabinets and other products. National standards for the main dimensions (ie functional dimensions) of furniture are subject to regulatory requirements. For example, the depth of the space in the hanging closet should be greater than or equal to 530mm, the distance between the upper edge of the hanging stick and the upper surface of the hanging long coat should be greater than or equal to 1400mm, and the height of the table furniture should be 680mm to 760mm, where the middle drawer of the writing desk The middle clearance height from the lower edge to the ground height shall be greater than or equal to 580mm, and the clearance height between the bookcase layers shall be greater than or equal to 230mm to 310mm.
The main dimensions mentioned above mainly refer to the understanding of the furniture purchase, because if the furniture is smaller than the specified size, it will bring a lot of inconvenience when used, affecting the use of furniture. If the depth of the large wardrobe space is too small, it will affect the hanging clothes, causing the door to close.
Related reading: Guide to the selection of solid wood furniture
The quality of metal parts and plastic parts of wooden furniture should be kept in mind
Metal parts and plastic parts are often used as fastening connectors in wooden furniture, so the quality of metal parts also determines the quality of the internal quality of wooden furniture. Metal parts require dexterity, smoothness, and good surface plating treatment. There should be no rust, burrs, etc., and the precision of the fittings should be high. Plastic parts should be beautiful in appearance and bright in color. The parts of the force in use should have strength and elasticity, and should not be too thin. The open connection requires flexible rotation, and the spring inside is tightly fitted so that the furniture will be smooth, easy and free of friction when it is opened.
Wood furniture panels should pay attention to environmental protection
The wood-based panel furniture in wood furniture is based on wood-based panels such as particleboard and medium-density fiberboard. The surface is decorated with melamine, PVC, wood veneer and paper grain. The wood-like pattern is clear and natural, smooth and flat. , has a good visual effect and feel. When purchasing furniture, it mainly depends on whether the surface of the furniture material has scratches, indentations, bubbling, degumming and peeling marks.
Related reading: The advantages and disadvantages of antique solid wood furniture and the way to distinguish
Office Whiteboard
Can be tailored at will, according to the needs of the site to tailor the appropriate size of office soft whiteboard is our special service. Please contact us freely if you need a unique office writable wall design. Not only plain whiteboard, but more design can be achieved by printing or magnetic adsorption.
Office Whiteboard
Large Office Whiteboard, Meeting Room Writing Board,Whiteboard in office,Whiteboard for Office Wall
Guangzhou New Magnetics Technology Co.,Ltd , https://www.softwhiteboard.com