The materials and ingredients of the plush toys have always been more elaborate in the production. Today's information on this plush toy will bring you relevant information. Selection of plush toy ingredients (1) Eyes: It is divided into plastic eyes, crystal eyes, cartoon eyes, moving eyes and so on.
(2) Nose: It is divided into plastic nose, flocking nose, nose, matte nose and so on.
(3) Ribbon (Ribbon): Specify the color, the quantity is small, or specify the style, please pay attention to the number of orders.
(4) Plastic bags: (PP bags are commonly used in American products, cheaper, European products must use PE bags; PE bags are not transparent enough for PP bags, but PP bags are more likely to be wrinkled and easily broken), PVC can only be used as packaging materials. (DEHP content must be limited to 3% / square.), heat shrinkable film is mostly used in color box packaging, as a protective film.
(5) Carton: (in two types)
Double 楞A=B, A=C, B=B, B=C, C=C, three 楞, A three B also (such as the backpack series), unless the customer specifies, usually export the outer box with A= B, the outer casing of the small size can be considered to use B=B or B=C. Before ordering the carton; you should first select the genuine supplier. You must first confirm the paper quality provided by the carton factory. Note that each family may be different. You should choose the authenticity of the goods. At the same time, you should also pay attention to the quality of each batch of purchases and prevent the supply of commercial goods. Second-class products pretend to be genuine, and other factors such as weather humidity, rainy season and other factors may also have adverse effects on paper.
Single 楞B33, C33, etc. usually do inner box, or domestic delivery of the turnover carton, the quality of the outer paper and the inner lining determines the rigidity of the carton.
(6) Cotton: divided into 7D, 6D, 15D, and divided into A, B, and C grades. We usually use 7D/A grades, and 6D is less used. Low-end products or products that are very hard and hard to apply are 15D/B or C. 7D is very smooth and elastic, 15D is rough.
According to the length of the fiber, it is divided into 64MM and 32MM cotton. The former is used for manual cotton washing, and the latter is used for machine punching.
The general practice is to put the original cotton into the loose cotton, to ensure that the loose cotton workers operate correctly, there are enough times of loose cotton, so that the cotton is completely loose to achieve good elasticity. If the effect of loose cotton is not good, it will cause a great waste of cotton consumption.
(7) Colloidal particles: (divided into PP, PE), the diameter should be greater than or equal to 3MM, and the particles are smooth and even. Products exported to Europe are generally more environmentally friendly than PE. Exports to the United States, except for special requirements of customers, can be made with PP or PE, PP is cheaper. All export product rubber pellets must be wrapped in inner bags, unless otherwise specified by the guest.
(8) Plastic parts: ready-made plastic parts, the body can not be changed, such as size, size, shape, etc., otherwise it is necessary to open the mold, the general plastic mold cost is expensive, ranging from several thousand yuan to several tens of thousands, depending on the size of the mold, the process Difficulty, depending on the choice of mold materials, so usually the production order output is less than 300,000, and the mold fee must be paid separately.
(9) (Color) printed matter: including color box, tag, sticker, etc. The price of color printing is directly related to the number of orders. If the order is small, the number of printed paper is small, which is easy to cause large color difference, uneven color, and loss of manufacturers. The ratio increases, so the unit price must be high.
To implement the unit price of printed matter, pay attention to whether it includes film, proof-proof, and coating. It is best to provide customers with film and color, and color ratio (four-color CMYK). Proportion), which speeds up boarding and accuracy.
(10) Cloth and weaving: We must pass 21 pounds of tension, so we have to use thick belts.
(11) Various types of cotton ribbons, ribbons, wire ropes, and rubber bands: pay attention to the difference in the quality of raw materials and the impact on product quality and cost.
(12) Velcro, buckle type, zipper type: Velcro pay attention to the high degree of fastness (especially when the functional use requirements are high)
(2) Nose: It is divided into plastic nose, flocking nose, nose, matte nose and so on.
(3) Ribbon (Ribbon): Specify the color, the quantity is small, or specify the style, please pay attention to the number of orders.
(4) Plastic bags: (PP bags are commonly used in American products, cheaper, European products must use PE bags; PE bags are not transparent enough for PP bags, but PP bags are more likely to be wrinkled and easily broken), PVC can only be used as packaging materials. (DEHP content must be limited to 3% / square.), heat shrinkable film is mostly used in color box packaging, as a protective film.
(5) Carton: (in two types)
Double 楞A=B, A=C, B=B, B=C, C=C, three 楞, A three B also (such as the backpack series), unless the customer specifies, usually export the outer box with A= B, the outer casing of the small size can be considered to use B=B or B=C. Before ordering the carton; you should first select the genuine supplier. You must first confirm the paper quality provided by the carton factory. Note that each family may be different. You should choose the authenticity of the goods. At the same time, you should also pay attention to the quality of each batch of purchases and prevent the supply of commercial goods. Second-class products pretend to be genuine, and other factors such as weather humidity, rainy season and other factors may also have adverse effects on paper.
Single 楞B33, C33, etc. usually do inner box, or domestic delivery of the turnover carton, the quality of the outer paper and the inner lining determines the rigidity of the carton.
(6) Cotton: divided into 7D, 6D, 15D, and divided into A, B, and C grades. We usually use 7D/A grades, and 6D is less used. Low-end products or products that are very hard and hard to apply are 15D/B or C. 7D is very smooth and elastic, 15D is rough.
According to the length of the fiber, it is divided into 64MM and 32MM cotton. The former is used for manual cotton washing, and the latter is used for machine punching.
The general practice is to put the original cotton into the loose cotton, to ensure that the loose cotton workers operate correctly, there are enough times of loose cotton, so that the cotton is completely loose to achieve good elasticity. If the effect of loose cotton is not good, it will cause a great waste of cotton consumption.
(7) Colloidal particles: (divided into PP, PE), the diameter should be greater than or equal to 3MM, and the particles are smooth and even. Products exported to Europe are generally more environmentally friendly than PE. Exports to the United States, except for special requirements of customers, can be made with PP or PE, PP is cheaper. All export product rubber pellets must be wrapped in inner bags, unless otherwise specified by the guest.
(8) Plastic parts: ready-made plastic parts, the body can not be changed, such as size, size, shape, etc., otherwise it is necessary to open the mold, the general plastic mold cost is expensive, ranging from several thousand yuan to several tens of thousands, depending on the size of the mold, the process Difficulty, depending on the choice of mold materials, so usually the production order output is less than 300,000, and the mold fee must be paid separately.
(9) (Color) printed matter: including color box, tag, sticker, etc. The price of color printing is directly related to the number of orders. If the order is small, the number of printed paper is small, which is easy to cause large color difference, uneven color, and loss of manufacturers. The ratio increases, so the unit price must be high.
To implement the unit price of printed matter, pay attention to whether it includes film, proof-proof, and coating. It is best to provide customers with film and color, and color ratio (four-color CMYK). Proportion), which speeds up boarding and accuracy.
(10) Cloth and weaving: We must pass 21 pounds of tension, so we have to use thick belts.
(11) Various types of cotton ribbons, ribbons, wire ropes, and rubber bands: pay attention to the difference in the quality of raw materials and the impact on product quality and cost.
(12) Velcro, buckle type, zipper type: Velcro pay attention to the high degree of fastness (especially when the functional use requirements are high)
It was so worth it to switch from plastic to glass! No more stains, no more scratches, no more replacing worn plastic containers every year! These are the containers we use for leftovers. We usually cook enough dinner for lunch the next day, so hot meals go straight to dinner plates and then into lunch containers. These are also easy to clean, I leave the meal boxes anywhere in the dishwasher, but I usually wash the LIDS by hand. If cleaning is required, the sealing ring inside the cover can also be removed.
Plastic Lunch Box,School Lunch Box,Glass Lunch Box,Plastic Lunch Containers
SY INTERNATIONAL (CN) CO.,LTD , https://www.symanufactures.com