Although the hanging machine is a more practical and convenient ironing equipment in daily life, but sometimes it is used for a long time or improperly used, there will always be such problems, such as the water leakage of the hanging machine , then how is the water leakage of the hanging machine ? do? The decoration of the decoration house below will bring you the reasons for the leaking of the hot machine and the treatment method. I hope everyone can help after reading it.
What should I do if the hot machine leaks?
Causes of water leakage from the hanging machine: 1. Water leakage from the linked machine:
Treatment: 1 ironing machine does not reach the use temperature to iron, the correct method should be used after the steam is evenly distributed; 2 hanging ironing machine ironing angle is too large or the ironing brush is used upside down, when the steam passes through the air tube When the hot head is reached, a part of the steam will condense into condensed water. Therefore, be careful not to make the hot head lower than the horizontal position by 30° for a long time. When using it, increase the hanging machine nozzle, or you can squat down the tube and then iron the clothes. This will not cause dripping problems.
Causes of water leakage from the hanging machine: 2. Water overflow from the hot machine:
Solution: Fill the water tank of the hanging machine with water, and re-correct the position of the water tank of the hanging machine. Also pay attention to lifting the water tank as little as possible during use, because the water pressure inside the water tank will be caused by the pressure difference between the inside and outside of the water tank during the lifting process of the water tank.
Causes of water leakage from the linked ironing machine 3. Water leakage from the hanging machine chassis:
Solution: first remove the water tank of the hanging machine, then pour off the water in the original ironing machine, directly add water to the water tank to see if the water flows out from the chassis. If the water tank is broken, then the water tank needs to be replaced.
The cause of leakage of the hanging machine is 4, the piston of the linked machine is leaking:
Solution: Fill the water tank of the ironing machine with water, screw the piston, and stand it upside down to see if the piston and the water tank are in contact with the water. If it still does not work, then you need to replace the water tank nut and gasket.
The above is what Xiaobian brought to you. What should I do if the hot machine leaks? I believe that everyone has a basic understanding of the leakage of the hot machine after reading this article. If you want to know more about the decoration consultation, please click to enter the decoration knowledge channel.
More related wonderful reading:
What should I do if the steamer is not steaming? Causes and solutions
What is a steamer? Is the steam hanging machine good?
What is a hanging machine? What is the purpose of the hanging machine?
Which hanging machine brand is better? Hanging hot machine top ten brands
How to use the hanging machine? What should I pay attention to when using the ironing machine?
Backpacks,Rucksack,Jansport Backpack,Mini Backpack
Ningbo Happiness Stationery Industrial & Trading Co Ltd , https://www.cnhappiness.com