Squeegee constant pressure device

Workflow: glass automatic pre-positioning → transmission → secondary fine positioning → printing → detection unloading glass transfer → drying machine (automatically connected).

The special positioning method has a strong adaptability to the complex shape of the print, such as printing of the front and rear fan-shaped glass pieces of the car, and the positioning is accurate (±0.1mm). For the easy-to-scratch and non-scratched prints, the equipment work surface is treated with a special process, so that the table is not scratched and wear-resistant, and the friction coefficient is low.

Using Mitsubishi (MITSUBISHI) PLC working system, friendly touch screen man-machine interface operating panel, each adjustment mechanism configuration high-precision position display, and a fault display system and optoelectronic protection device. The head is horizontal and moves up and down, using a worm gear reducer with a safety brake motor to control the speed and stability, and it is stable up and down. The frequency conversion is used to control the squeegee speed, and the squeegee and overlay can be adjusted at different speeds. l The screen adjustment adopts X, Y axis movement alignment, which is simple and accurate. The oil return knife can be set to cover the ink in advance, and cover the ink during printing to reduce the phenomenon of screen plate and shadow.

The squeegee uses a constant pressure device. After the squeegee is pressed to set the printing pressure, it can automatically compensate for the irregular thickness of the print.

The oil return knife adopts a constant pressure device, and the pressure can be arbitrarily set to have an automatic compensation function. The thickness of the ink can be covered, and any control can be performed without generating a shock wave. l It can set the scraper and cover the ink knife to repeat the operation without moving the wire frame, and the accuracy is not deformed.

This machine's various actions are controlled by Mitsubishi (MITSUBISHI) PLC in Japan. It can reduce the failure rate and is easy to maintain. It adopts the Mitsubishi (MITSUBISHI) man-machine interface operation control, which can obviously display the wrong operation and various instruction prompts; the power supply control system adopts Schneider (Japan) and Japan Panasonic (NAIS) electrical components; Japan Mitsubishi (MITSUBISHI) frequency converter is used in conjunction with Taiwan Liming (LiMing) deceleration motor; Japan THK linear guideway and MEGADYNE timing belt are adopted for printing transmission. The top of the head adopts Taiwan Liming worm gear reducer and brake motor; all gas parts are original, the cylinder adopts the British NORGREN brand.

Technical Parameters:

parameter

model

JS-GL7011SD

JS-GL1013SD

JS-GL1326SD

JS-GL1726SD

JS-GL2445SD

Largest glass
Printing size

700×1100mm

1000×1300mm

1300×2600mm

1700×2600mm

2400×4500mm

Minimal glass
Printing size

300×300mm

350×400mm

500×700mm

550×700mm

900×1200mm

Maximum frame
size

1100×1900mm

1400×2100mm

1900×3380mm

2300×3380mm

3000×5280mm

Bench
size

1000×1500mm

1300×1700mm

1600×3000mm

2000×3000mm

2700×4900mm

Print thickness

2.5~19mm

2.5~19mm

2.5~19mm

2.5~19mm

2.5~19mm

Total power

5.62kw

5.62kw

12kw

12kw

12.7kw

Mechanical appearance
size

3300×1500
×1300mm

4200×2760
×1300mm

8220×2500
×1300mm

9420×2500
×1300mm

15120×3200
×1300mm

Mechanical weight

1000kg

1200kg

4500kg

5000kg

8000kg