ã€Abstract】 1. Whether the office furniture materials are reasonable and different office furniture, the surface materials are different. Such as tables, chairs, cabinet legs, the use of hardwood, relatively strong, can bear the weight, while the internal materials can be used other materials; Yimeide furniture http://htbg.cnjiaju.com/ share.
It was found that the wood had insect eyes and foaming, indicating that the drying was not complete. After checking the surface, open the door and drawer door to see if the inner material is rotten. You can use your fingernail to lick it. If you break it in, it means that the inner material is decaying. After opening the door, smell it with your nose. If it is nose, glare, or tears, it means that the formaldehyde content in the glue is too high and it will be harmful to the human body.
2, office furniture four feet flat, this flat on the ground, I know that some office furniture only three legs landing. Look at the desktop is straight, can not bow back or collapsed. The table top is raised, the glass plate is placed on it, and the table top is recessed, and the glass plate is crushed by a pressure. Pay attention to the inspection of the cabinet door. The slit of the drawer should not be too large. It should be straight and straight, and the door should not sag.
3. Whether the office furniture structure is firm or small, office furniture, such as chairs, stools, hangers, etc., can be dragged on the concrete floor when picking, gently falling and falling, the sound is crisp, indicating good quality; if the sound is dumb, there are The murmur of the slaps, indicating that the blinking is not tightly combined and the structure is not strong. The desk and table can be shaken by hand to see if it is stable. The sofa can sit and sit. If you sit on a move, you will twist and sway. If you shake it, it will be a nail, and it will take a long time.
Square tables, tables, chairs and other legs should have four triangular clips, which can be used for fixing. When you choose, you can look over the table and chair. The cloth chair can be touched by hand.
4, veneer office furniture joints are not strict, whether it is veneer veneer, PVC or pre-painted paper, should pay attention to whether the skin is flat, with or without bulging, foaming, seams are not strict.
Look at the light when you check it, and don't see it when you don't. The ash veneer veneer veneer office furniture is relatively damaged, generally only two years. In the case of wood veneers, the veneered veneers are better than the chopped ones. The way to identify the two is to look at the pattern of the wood. The wood texture of the cut veneer is straight and dense, and the veneered veneer pattern is curved and sparse. Particleboard veneer office furniture, the ground part must be edged, the edge banding will absorb moisture, swell and damage. Generally, the corners of office furniture are easy to tilt up. When you choose, you can use your hands to buckle the corners. If you buckle up, it means there is a problem with the glue.
5, the office furniture edge is flat and the edge is not flat, indicating that the internal material is wet, a few days will seal off. The edge banding should also be rounded and not straight at right angles. The edges sealed with wood strips tend to get wet or crack. The office furniture inlaid with plywood is nailed with nails. It is necessary to pay attention to whether the nail holes are flat and whether the color of the nail holes is consistent with other places. Usually the nail hole is sealed with putty. Pay attention to whether the putty is bulging. If it is bulged, it will not work. Slowly, the putty will fall out from the inside.
6. The paint part should be smooth. The paint part of the office furniture should be smooth and flat, not sprinkled, wrinkle-free, and flawless. The corners are not straight at right angles, and the straight edges are prone to slag and paint. There should also be a paint inside the door of the office furniture, without the paint board being easy to bend and not beautiful.
7. Is the fitting installation reasonable? For example, check the door lock switch is not working; the big cabinet should be equipped with three dark hinges, and some can only be installed with two; the upper three silks, some cut corners, only one screw , use will fall.
8, the sofa should sit on the sofa, should pay attention to the surface should be flat, but not high and low; soft and hard to be even, but not this piece of hard, that piece of soft; soft hardness should be moderate, neither too hard nor too soft.
The method of selection is to sit down and squat with your hand, the flatness is not flat, and the spring does not ring. If the spring laying is unreasonable, causing the spring to bite the spring, it will make a sound. Secondly, it should also pay attention to whether the quilting has broken wires or jumpers, and whether the density of the corner teeth is reasonable.
9, the color should be coordinated with the interior decoration. The white office furniture is beautiful, but it is easy to turn yellow when the time is long, and the black is easy to gray. Don't be beautiful at the time. At the end, it is not white, black is not black. In general, office furniture that resembles mahogany is not easily discolored.
pliers wrench,ratchet wrench,gearwren,adjustable spanner
Henan Probon Tools CO.,LTD , https://www.tapemeasuretools.com